Features
This model has a 36-inch cable, ( We
sell the 72 inch units also in our store ) fitted with Led's and a small camera
at the working (distal) end. The camera/cable diameter is 10 mm, so it will fit
into a standard spark plug hole. The cable is semi-rigid, but flexible, and can
be bent to fit or follow the shape of the vehicle or component being viewed. The
manufacturer recommends that you limit the bend radius to three inches, however,
to prevent cable damage.
Using the VOscope
The display
is surprisingly clear, even in moderately bright light and, since there is no
focus adjustment to fiddle with, you just point and shoot.
The Camera
scope is for remote inspection of areas generally inaccessible to the naked
eye. comes with a distal video camera at the end of a 36" shaft for
internal inspection of engines, A/C systems, interior structures of walls, and
other industrial and similar applications.
Imaging and illumination is
provided by a full color image sensor and dual solid state Led's which are
controlled by an easy to use on/off rocker switch.
The 2.5" full color LCD
screen allows the user to view live video from the distal lens.
The unit
is powered by 4-AA batteries. This unit is shipped with a protective case
for storage. Accessory Mirror allows user to see 90 degrees to axis of the
shaft. The Magnet accessory will pick up approx 1/4 lb.
Its very easy
to use.:
Recording or viewing what the camera is seeing is easy. Just
plug in an RCA cable into the video input on the side and then plug the video
input into either a VCR or TV input. It is that simple.
If you see a bright white screen, you probably have the
camera lens right up against a reflective surface that is bouncing the LED light
back into the camera, creating glare. Just pull the probe back a bit.
If you are working inside a contained area with little or no
ambient light, remember that the Led's are providing the illumination. Moving
the camera tip in and out a bit can improve lighting on the object for the best
screen display.
When using the mirror for right angle views, clean the mirror
glass carefully with a lint-free cloth. Small specks of dirt and dust and
fingerprints degrade the screen image.
Specifications:
High resolution remote color camera
Autofocus (Viewing distance: 0.4" to infinity)
Distal tip diameter: 0.42" maximum (0.46 with accessories)
Cable diameter: 10 mm
Resolution 320 x 240 pixels
2.5" full color viewing monitor
10mm shaft diameter
Shaft material: High-density polyethylene (HDPE)
Housing material: Nylon
Waterproof, Flexible Staylok shaft
36" standard shaft length ( 72" also available )
High output LED illumination
5 hrs operation on 4 AA batteries (included)
Mirror and magnet accessories included
Video out for optional recording
Poly pro storage case
1 year warranty
Video out port: RCA jack - NTSC signal
Light source: (2) white LED's in tip
Viewing angle: 55° (without clip-on mirror)
Minimum bending radius: 3"
Power: (4) AA batteries
Battery life: approximately 4 hours
Kit includes:
Padded hard case
Operating Instructions
Batteries (4) AA alkaline
Clip-on 90° mirror
Magnetic clip
1 year limited manufacturer's
warranty